繁體中文
English
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
AC-HVAC Clamp Meter TM-1016
AC-HVAC Clamp Meter
◆ CAT III 600V
◆ 3-3/4 digit LCD Backlit Display, with Analog Bargraph.
◆ Display Counts: 4000.
◆ Auto Ranging.
◆ AC/DC current: 0.1μA to 4000μA. (using test leads)
◆ Maximum Current: 400 Amps
◆ AC Current: 0.01A to 400A (using jaw measurement)
◆ AC Voltage Range: 0.1mV to 600V, ±(1.0% of rdg + 3 dgts)
◆ DC Voltage Range: 0.1mV to 600V, ±(0.8% of rdg + 2 dgts)
◆ Ranges: ACV, ACA, DCV, DCA, Resistance, Continuity, Capacitance, and Temperature.
◆ Maximum Conductor Size: 30mm
◆ Continuity test below 40 ohms, buzzer will sound.
◆ Auto Power off
◆ Data Hold: Yes
◆ Double injection outer case
◆ Capacitance: 10pF to 4mF
◆ Temperature (Type 'K'): -50°C to 1200°C
◆ Power Supply: 2 1.5V type 'AAA' batteries
◆ Resistance: 0.1 ohm to 40 megohms ±(0.8% + 2 dgts)
◆ Dimensions: 205mm (L) x 64mm (W) x 39MM (D)
◆ Weight: 280g (including batteries)
AC-HVAC Clamp Meter TM-1016
-
Product NO468.365
Go-Through Driver, Special Use Tool, Curved
◆ Go-thru steel blade for added strength and no loss of impact energy from a hammer blow
◆ Square tip can be turnned by spanner.
◆ Overall Length: 290mm
◆ Shank Length: 175mm
◆ Shank Width: 8mm (square)
◆ Shank Tip is in 15mm wide
◆ Handle Diam.: 31mm
◆ Similar product P/N 468.366 is also available. -
Product NO468.ASB10
Bits for Rechargeable, Electric and Air Driver, 10pcs/set
◆ 10pcs / set
◆ Magnetic tip
◆ Bits included are,
Double-ended Philips #1 x 65mm x 1 pcs
Double-ended Philips #2 x 45mm x 2 pcs
Double-ended Philips #2 x 65mm x 2 pcs
Double-ended Philips #2 x 110mm x 1 pcs
Double-ended Philips #3 x 65mm x 1 pcs
Philips #1 x 100mm x 1 pcs
Philips #2 x 100mm x 1 pcs
Double-ended Philips #2 / Slotted 6.0mm x 65mm x 1pcs -
Product NOEPZ-78
[Specifications]:
Overall Length: 225mm
Material: Carbon Steel
Handle Material: TPR
Screw Head Size: Dia. 3~12mm
Removable Screws: Dome (Truss) Head, Round and Pan Head.
Cutting Capacity: Flat Cable dia. 2.6mm x 3 cores / Hard Wire dia. 3.2mm / Copper Wire dia. 4mm / Stainless Wire dia. 2mm / Stranded Wire 8m㎡
Crimping Capacity: Bare Terminals AWG16~12 (1.25~3.5m㎡)
Hardness: HRC 60±2
Weight: 350g
[Features]:
◆ Designed especially for electrician a multi-functional pliers with unique screw extractor.
◆ Eccentric high leverage structure, powerful in cutting and gripping.
◆ 21mm long blade and the specially-designed eccentric structure offer 30% more cutting power compared to conventional pliers.
◆ 2-way non-slip gripping jaw. Vertical serrations grip a screw head securely, while horizontal serrations hold a tie band and a thin plate securely.
◆ The unique T-shaped handle helps prevent the handle sleeve from twisting or turning round and has the feature of light-weight.
◆ Strap hole in the end of the handle prevents the pliers from falling. -
Product NOETR-11
[Specifications]:
Material : Carbon steel
Hole Size: Dia. 3-11.5mm
Blade: 81mm
Overall Length: 127mm
Hardness: HRC55-58
[Features]:
◆ A professional pipe deburring tool.
◆ Tapered blade ideal for reaming holes in sheet metal, aluminum and similar materials.
◆ The bit can be used with the standard T-handle or other interchangeable handles (6.35mm hex drive).
◆ It can be attached to a power driver, too. (Not for use with Impact Drivers).
