Pin Vise, 4 Collet Sizes

Glue Gun 40W

[Specifications]:

Input: 100-240V
Power: 40W
Package Included: 2 pieces of 7/16x4" glue sticks

[Features]:

◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.

[Manual & Safety Cautions]:

1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets.

Craft Knifes and Blades

◆ 6 different shapes of baldes are included
◆ Diameter of shaft: 8mm
◆ Blades can be fastened and fixed on the knife.
◆ Please be careful when using.

Epoxy Adhesive 15g

[Specifications]:

Capacity: 15g
Work Time: 5mins

[Features]:

◆ For adhering metal, ceramics, glass.
◆ Quick and effective!

Octopus KT-17 Diagonal Cutting Pliers 4", Flush Cut, Taper Head

[Specifications]:

Length: 4"(100mm)
Material: Carbon Steel
Hardness: Blade HRC 60±2
Cutting Capacity: Iron Wireφ1.2mm / Copper Wireφ1.6mm / Cable Wireφ2.0mm
Weight: 42g

[Features]:

◆ Ideal for wire harnesses especially useful in cutting zip ties, leaving a flush and flat surface with no sharp ends to increase safety.
◆ Perfect for cutting head pins, eye pins, jump rings and chains in jewelry making. Using this cutter to get flush end and flat edge for the wires that you're working on.
◆ Great tool for cutting in plastic models without causing brittle plastic burrs.
◆ Spring-loaded to prevent fatigue when in prolonged use.
◆ The blades are oiled to prevent rust.
◆ Plastic-dipped handles for comfort in your palm.
◆ Drop forged and heat treated steel construction.