Craft Knifes w/ 6 Available Blades

Glue Gun 10W

[Specifications]:

Input: 100-240V
Power: 10W
Package Included: 2 pieces of 5/16x4" glue sticks

[Features]:

◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.

[Manual & Safety Cautions]:

1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets.

Octopus KT-17 Diagonal Cutting Pliers 4", Flush Cut, Taper Head

[Specifications]:

Length: 4"(100mm)
Material: Carbon Steel
Hardness: Blade HRC 60±2
Cutting Capacity: Iron Wireφ1.2mm / Copper Wireφ1.6mm / Cable Wireφ2.0mm
Weight: 42g

[Features]:

◆ Ideal for wire harnesses especially useful in cutting zip ties, leaving a flush and flat surface with no sharp ends to increase safety.
◆ Perfect for cutting head pins, eye pins, jump rings and chains in jewelry making. Using this cutter to get flush end and flat edge for the wires that you're working on.
◆ Great tool for cutting in plastic models without causing brittle plastic burrs.
◆ Spring-loaded to prevent fatigue when in prolonged use.
◆ The blades are oiled to prevent rust.
◆ Plastic-dipped handles for comfort in your palm.
◆ Drop forged and heat treated steel construction.

[Specifications]:

Model No.: D400
Dimensions: Dia.30mm x Length187mm
Weight: 89g
Input: AC100-240V, 50/60Hz
Output: 12V(0.5A) / 6W
Speed: 1,000 - 6,000 linear strokes / min
Stroke Length: 3mm
Contents Included: Pen Sander x 1, Power Supply x 1, Hand-piece Rest x 1, Tool Bits x 9, Instruction Manual x 1

[Features]:

◆ Designed for sanding and shaping for plastic models.
◆ With its sanding attachments, you can deal with surfaces, slots and tight corners easily.
◆ Light-weight and easy-to-use features make this pen sander a must-have tool for both beginners and professionals.
◆ With vents in two positions ensures good ventilation and reduces the risk of being overheated.
◆ Ergonomic and non-slip grip design offers better maneuverability.
◆ Users are able to adjust the speed with the speed adjustment wheel from low to high.
◆ Easy to change the bits by loosening the black nut.
◆ The cross-groove design in the front head offers users the options for different positions of bits.
◆ With versatile shapes of sanding accessories and liner stroke action, users have the best suitable tools for different applications.

[Cautions]:

1. Please wear eye protection and dust mask when using.
2. Some accessories are sharp, please handle with care.
3. Please keep hands and the environment dry when using the tool.
4. Try this tool set from low speed and gradually adjust to higher speed, please stop using it for 5 mins after 15-mins continuous usage.
5. Please make it out of reach from children.

David 400 Sanding Pads 240 Grit

[Specifications]:

Model No.: M402
240 Grit
Size Per Pad: 113x70mm
Contents: 10 pads, and one board for cutting different shapes of pads.

[Features]:

◆ For David 400 pen sander tool set.
◆ Self-stick sanding pads.
◆ One board with various shapes for easy cutting.