Silicone Bar H Type 15.5mm Wide

Impulse Sealer 16" 110V

[Specifications]:

Machine Model: SP-400H
Power Source: 110V
Power: 600W
Weight: 5.0kgs
Sealing Length: 400mm (16")
Sealing Thickness: 0.4mm
Box Dimension: 58 x 11.5 x 20cm (22.8" x 4.5" x 7.8")

[Features]:

To organize and store small stuff properly and orderly, households, stores especially in food supplies business and in bakery, or electronic industries that keep and maintain small components can all benefit from this easy-to-use manual heat sealer machine, which seals plastic PP, PE, PVC bags within a few seconds. When sealing different materials of bags, just turning a dial to adjust heat setting.

Not only being simple and fast, its heavy iron base that compose the foundation of the impulse sealer offers stability and reduce the possibility of being tilted when impulse sealers are in use.

S-Turbo also offers comprehensive spare parts and accessories of these impulse sealers, from heating element to silicone strip, we are here to support your sealing demands.

Major features are,

◆ Practical sealing solution for various industries and household use for packing materials of plastic PP, PE, PVC bag.
◆ Easy to use without fuss.
◆ With easy-to-read sealing power indicator.
◆ Adjustable timer for optimal control.
◆ Warm-up quickly in few seconds.

Cloth Tape for Impulse Sealer, 1" x 16"

Among all spare parts and accessories for impulse sealers S-Turbo offers, the insulating, wear-resistant and high-temperature-resistant cloth tape made by Teflon/PTFE is one of the key components that needs to be replaced from time to time to maintain sealing performance. S-Turbo has PTFE cloth tape in various sizes and packages, for tool distributors that require specific sizes, shapes or units to be included in a single package, please feel free to discuss with S-Turbo. We're here to explore the possibilities with you!

[Specifications]:

Size: 1" x 16"
Material: Teflon/PTFE
Package: 10pcs/pack

[Features]:

◆ With insulating, wear-resistant and high-temperature-resistant features, these Teflon sheets can sustain 200℃ and make them suitable as cloth tapes for sealing machines.
◆ Once the original tapes are worn out, please replace with these new Teflon cloth tapes. The sealing or cutting effect of impulse sealers will soon be improved.
◆ It's recommended to check the sealing size of your impulse sealer first before purchasing the cloth tape to make sure the compatibility.
◆ Not only applicable to impulse sealer machines, where heat resistance or high insulation is required, these Teflon/PTFE cloth tapes are great as the shielding sheets. These cloth can be cut freely in any shapes to fit your sealing or shielding requirements.

Impulse Sealer Heating Elements, 16", Pre-cut, Flat Profile

[Specifications]:

Width: 2mm
Length: 16"(400mm)
Thickness: 0.2mm
Package Included: 10pcs/pack

[Features]:

Among all spare parts and accessories for impulse sealers, S-Turbo highly recommends to replace the heating elements made of flexible nickel and chromium alloy from time to time to keep sealing or cutting performance as great as new ones. S-Turbo has prepared the heating elements in various lengths and packages, some of them are pre-cut for manual or foot pedal impulse sealers in different sizes, made replacements of accessories a lot easier.

The heating elements S-Turbo supplies can be divided into two categories according to the shapes of its cross-section. One is flat and the other one is round. Usually, the heating element with flat cross-section is used for sealing, and the one with round profile is used for cutting and sealing at the same time. Though their shapes are slightly different from each other, they both seal the plastic bags with the heat transferred. The major difference is that when using the heating element with flat cross-section, the plastic bags remains intact after being sealed, while the plastic bags will be seperated and cut after the handle of impulse sealer is pressed when the round heating element is assembled on the sealer.

The major features of heating elements in flat cross-section are,

◆ The heating element is made of flexible nickel and chromium alloy, features with high temperature resistance.
◆ With a screwdriver, you can install and replace heating elements easily. By replacing the old ones, sealing effect and efficiency will be improved.
◆ Ideal for sealing plastic bags tightly.

Please check with S-Turbo on the compatibility of spare parts before purcahsing, and feel free to discuss with us your requirements on width, thickness, and packages of heating elements.

Dual Temperature Heat Gun 1500W 110V

Heat gun is a versatile tool with wide applications. Most commonly, it is used to strip paint, adhesives, plaster, spackle, and floor tiles. This tool is also widely used for shrink wrapping of plastic in packing and heat shrink tubing in strengthening and protecting the wire connections. Aside from these common applications, the heat gun can also be used as a finishing tool for post-processing in 3D printing. By its heat, it melts away unwanted plastic parts of 3D printed objects.

To ensure safer user experience, please always follow the safety instructions and read the manul before using. And please keep distance at 7cm between heat gun and the object being heated. If the distance is closer than 7cm, the heat outflowed will not have enough space to ventilate and cause overheat inside the heat gun. When using or handling the heat gun, please prevent it from falling off otherwise the inner parts may be broken by strong force. For more safety instructions, please read the manul include in the package.

[Specifications]:

Input Voltage: 110V
Power Input: 1500W
Power Output: 1250W

[Features]:

◆ Dual temperature settings at 315℃ and 600℃.
◆ A versatile tool with wide applications. Most commonly, it is used to strip paint, adhesives, plaster, spackle, and floor tiles. This tool is also widely used for shrink wrapping of plastic in packing and heat shrink tubing in strengthening and protecting the wire connections. Aside from these common applications, the heat gun can also be used as a finishing tool for post-processing in 3D printing. By its heat, it melts away unwanted plastic parts of 3D printed objects.
◆ Please always follow the safety instructions and read the manul before using.
◆ Please keep distance at 7cm between heat gun and the object being heated. If the distance is closer than 7cm, the heat outflowed will not have enough space to ventilate and cause overheat inside the heat gun.
◆ When using or handling the heat gun, please prevent it from falling off otherwise the inner parts may be broken by strong force.