Electric Glue Gun

Glue Gun 10W

[Specifications]:

Input: 100-240V
Power: 10W
Package Included: 2 pieces of 5/16x4" glue sticks

[Features]:

◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.

[Manual & Safety Cautions]:

1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets.

Glue Gun 40W

[Specifications]:

Input: 100-240V
Power: 40W
Package Included: 2 pieces of 7/16x4" glue sticks

[Features]:

◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.

[Manual & Safety Cautions]:

1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets.

Glue Gun 80W

[Specifications]:

Input: 100-240V
Power: 80W
Package Included: 2 pieces of 7/16x4" glue sticks

[Features]:

◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.

[Manual & Safety Cautions]:

1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets.

Industrial-Grade Glue Gun 110V 110W, 50mm Long Tip

[Specifications]:

Input: 110V
Power: 110W
Glue Sticks: 7/16" (11mm)
Nozzle Tip Length: 50mm, Extra Long
Package Included: One Nozzle Tip, 20mm Long, Standard Type
Material of Nozzle Tip: Copper

[Features]:

One of the most common packaging materials in packing department of every manufacturer or company is usually the cardboard and corrugated boxes. How to well protect products packed inside in transit by bonding and sealing these cardboard and corrugated boxes securely is an important task before shipping.

These industrial-grade glue guns offered by S-Turbo are designed to meet and exceed the highest standard of your packing requirement. The temperature is adjustable according to the glue sticks applied and the packaging applications. By fine tuning the screw indicated in the manual in clock-wise direction, the temperature can be lowered. On the other hand, higher temperature will be achieved if turning the screw in counter clock-wise direction. Generally speaking, the glue sticks from lowest to highest in ascending order in terms of softening point of temperature are clear color, light tan/straw color, and finally the white color ones.

[Safety Cautions]:

1. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
2. Never touch the nozzle. Flush with cold water immediately if any contact.
3. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
4. Please keep glue gun away from reach of children and pets.

Industrial-Grade Glue Gun 220V 100W, 46mm Long Tip

[Specifications]:

Input: 220V
Power: 100W
Glue Sticks: 7/16" (11mm)
Nozzle Tip Length: 46mm, Extra Long
Package Included: One Nozzle Tip, 20mm Long, Standard Type
Material of Nozzle Tip: Copper

[Features]:

One of the most common packaging materials in packing department of every manufacturer or company is usually the cardboard and corrugated boxes. How to well protect products packed inside in transit by bonding and sealing these cardboard and corrugated boxes securely is an important task before shipping.

These industrial-grade glue guns offered by S-Turbo are designed to meet and exceed the highest standard of your packing requirement. The temperature is adjustable according to the glue sticks applied and the packaging applications. By fine tuning the screw indicated in the manual in clock-wise direction, the temperature can be lowered. On the other hand, higher temperature will be achieved if turning the screw in counter clock-wise direction. Generally speaking, the glue sticks from lowest to highest in ascending order in terms of softening point of temperature are clear color, light tan/straw color, and finally the white color ones.

[Safety Cautions]:

1. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
2. Never touch the nozzle. Flush with cold water immediately if any contact.
3. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
4. Please keep glue gun away from reach of children and pets.

Industrial-Grade Glue Gun 110V 110W, 20mm Long Tip

[Specifications]:

Input: 110V
Power: 110W
Glue Sticks: 7/16" (11mm)
Nozzle Tip Length: 20mm
Package Included: One Nozzle Tip, 20mm Long, Standard Type
Material of Nozzle Tip: Copper

[Features]:

One of the most common packaging materials in packing department of every manufacturer or company is usually the cardboard and corrugated boxes. How to well protect products packed inside in transit by bonding and sealing these cardboard and corrugated boxes securely is an important task before shipping.

These industrial-grade glue guns offered by S-Turbo are designed to meet and exceed the highest standard of your packing requirement. The temperature is adjustable according to the glue sticks applied and the packaging applications. By fine tuning the screw indicated in the manual in clock-wise direction, the temperature can be lowered. On the other hand, higher temperature will be achieved if turning the screw in counter clock-wise direction. Generally speaking, the glue sticks from lowest to highest in ascending order in terms of softening point of temperature are clear color, light tan/straw color, and finally the white color ones.

[Safety Cautions]:

1. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
2. Never touch the nozzle. Flush with cold water immediately if any contact.
3. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
4. Please keep glue gun away from reach of children and pets.

Glue Gun Nozzle Tip, 20mm Long, Standard Type

[Specifications]:

Length: 20mm
Diameter: 3mm
Material: Copper

[Features]:

◆ Compatible with industrial-grade glue gun offered by S-Turbo.
◆ Made of durable copper and is able to sustain high temperature.
◆ It's highly recommended to prepare an extra replacement nozzle tip for your glue gun in case of missing the original one.
◆ Please do not touch the nozzle tip when it's hot and please follow the safety instructions written on the manual when using glue gun in your bonding and sealing tasks.

Glue Gun Nozzle Tip, 28mm Long, Precision Type

[Specifications]:

Length: 28mm
Diameter: 3mm / 4.2mm
Material: Copper

[Features]:

◆ Compatible with industrial-grade glue gun offered by S-Turbo.
◆ Made of durable copper and is able to sustain high temperature.
◆ The design and shape of this nozzle tip enables user to access into the narrow space and seal precisely.
◆ It's highly recommended to prepare an extra replacement nozzle tip for your glue gun in case of missing the original one.
◆ Please do not touch the nozzle tip when it's hot and please follow the safety instructions written on the manual when using glue gun in your bonding and sealing tasks.

Glue Gun Nozzle Tip, 35mm Long, Precision Type

[Specifications]:

Length: 35mm
Diameter: 3mm / 4.2mm
Material: Copper

[Features]:

◆ Compatible with industrial-grade glue gun offered by S-Turbo.
◆ Made of durable copper and is able to sustain high temperature.
◆ The design and shape of this nozzle tip enables user to access into the narrow space and seal precisely.
◆ It's highly recommended to prepare an extra replacement nozzle tip for your glue gun in case of missing the original one.
◆ Please do not touch the nozzle tip when it's hot and please follow the safety instructions written on the manual when using glue gun in your bonding and sealing tasks.

Industrial-Grade Glue Gun 220V 100W, 20mm Long Tip

[Specifications]:

Input: 220V
Power: 100W
Glue Sticks: 7/16" (11mm)
Nozzle Tip Length: 20mm
Package Included: One Nozzle Tip, 20mm Long, Standard Type
Material of Nozzle Tip: Copper

[Features]:

One of the most common packaging materials in packing department of every manufacturer or company is usually the cardboard and corrugated boxes. How to well protect products packed inside in transit by bonding and sealing these cardboard and corrugated boxes securely is an important task before shipping.

These industrial-grade glue guns offered by S-Turbo are designed to meet and exceed the highest standard of your packing requirement. The temperature is adjustable according to the glue sticks applied and the packaging applications. By fine tuning the screw indicated in the manual in clock-wise direction, the temperature can be lowered. On the other hand, higher temperature will be achieved if turning the screw in counter clock-wise direction. Generally speaking, the glue sticks from lowest to highest in ascending order in terms of softening point of temperature are clear color, light tan/straw color, and finally the white color ones.

[Safety Cautions]:

1. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
2. Never touch the nozzle. Flush with cold water immediately if any contact.
3. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
4. Please keep glue gun away from reach of children and pets.